Today demand of high quality headphones is high as more people want to listen to great music on their headphones. In this scenario, the electrostatic earphones and speakers are getting much popular among people because they offer high quality sound that many people desire to listen to. These headphones work on a different principle other than regular "dynamic" or "moving loop" earphones and speakers. For the people who often have the question do magnets conduct electricity? They got the answer in the modern electrostatic earphones and speakers.
Many people do enjoy great music on their headphones and speakers but they are not aware of the science and engineering behind them. The concept of magnet transporting electricity is not new, but its vitality has indeed developed recently. This is a scientifically proven fact that some of the best magnet conducts electricity.
How It Work?
The Traditional speakers and earphones stick a coil of wire inside a magnet and paste this loop to a hardened cone or arch that is held set up with a springy suspension. Current goes through this loop, and electromagnetism makes power on the coil while in the field of the magnet. The subsequent power vibrates the coil, and since it's stuck to an overwhelming cone, moves the entire jumble in and out. This technique was developed way back in the late 18th century is even used today.
The electrostatic system allows putting power on an ultra-light film without contacting it. It's a similar thing as electrostatic stick on apparel and dry-cleaning packs. Electrostatic powers are then applied equitably over the whole film. It's enchantment; the sound comes out with no physical contact, considerably less any impedance from curls, firm cones, or any of the issues that plague regular systems.
Electrostatic earphones use slender diaphragms that are known for lowering down the excess vibration in the sound hence providing more clarity to the music.
Electrostatic systems work by putting a static (immobile) electric charge on a film that glides between two punctured metal plates. At the point when sound voltages are applied over the plates, static stick and aversion make the whole film move without anything else. This film is small to such an extent that it weighs not exactly the air around it, and has no resonances or vitality stockpiling which prompts the shading intrinsic in moving loop speakers.
Since the electric charge on the film doesn't move that’s why it is called “static”. It takes only a couple of moments for the charge to develop when turned on. Since the electrons hold their places on the film, the powers concerned them by the electric field permits these electrons to move the film, rather moving around the film.